After its initial release the demand for the Atlas bipod remains strong resulting in a back log running as many as 8 weeks at times.  While we are striving to improve this, please understand chances are any civilian order for an Atlas bipod will not ship in our normal 2 business days.  In addition, there are several things that could become a reality for us at B&T resulting in a new policy regarding civilian sales.  However, before any such policy would take effect, we would deliver ALL civilian orders before the new policy would be implemented.   So, the bottom line, if you want an Atlas Bipod, the best play is to order one placing you in line according to order date.  IF YOU PLACE AN ORDER ON-LINE AND SELCT PAYMENT OF CREDIT CARD, YOU WILL BE BILLED IMMEDIATELY.  If you want to avoid being billed at that time, simply select payment method of “Money Order or Check” and then place your contact information in the “Comments” section.  This is very important because the system does not capture any contact information when paying this way.  So please remember to put your contact information into the comment section when choosing that payment method.  Then, when we are ready to ship, we’ll contact you for your Credit card information.  

The Atlas Bipod project has been a long journey, from conception of what a bipod should be to a brief and frank discussion with Mr. Harris at SHOT, where he expressed no interest in adding my concepts to the Harris product line to what we see today as the Atlas bipod.  The Atlas has been tested by professionals and civilians alike, tested in the sands of Iraq and found to not foul, tested in a Red Bull induced shooting session and survived.  The new V8 Atlas is ready for you.

The images on the top left were made by Frank Galli bottom left show the V4 production Atlas Bipod compared to a Harris Swivel 6-9” bipod for size comparison only (the Harris bipod is a good bipod and has set the standards to which others are compared, thus the comparison).  The video shows a V7 in the “white” before the hard anodize treatment being shot from, off a tailgate with a DPMS 20” .308 rifle.

V8 ATLAS

The NEW V8 has the following features:

• Construction from T6061 Aluminum, Type III Hard Anodized black
• Stainless steel springs and fasteners
• UHMW components used for smooth tracking
• 15 degrees +/- of preloaded Pan
• 15 degrees +/- of preloaded Cant
• Preload on Pan and Cant can be tightened by means of the knurled knob
• Picitinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount (we offer the ARMS 17S on the BT10-LW17 but any lever mount with that same hole spacing will work on the BT10-NC).
• Leg positioning is possible by using either hand to move the legs into any of the five leg positions; legs stowed back, 45 degree back, 90 degrees straight down, 45 degrees forward and stowed forward.
• All 5 leg positions are maintained by push button heat treated stainless steel components allowing the shooter to load the bipod at any of the three deployed positions.
• Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions ¾" apart and can be done by either hand.
• Optional 3" leg extensions to increase height available.
• Standard soft durable Rubber feet that are suitable for many surfaces.
• Optional interchangeable Ski and Cleat style feet can be swapped in the field with the press of a ball plunger with a bullet tip.
• Optional mounting systems available for Accuracy International and soon to be released Sako TRG rifles.
• Estimated range of elevation on the BT10 is 5-9" from the surface up to the rail.
• Estimated weight of 10.6 ounces for the clamp on style
• Proudly Made in America

All of the Atlas bipods have the same functionality; they only differ in the mounting hardware configurations as noted below;

1. BT10 - Atlas Bipod  - Standard two screw clamp on style
2. BT10-LW17 - Atlas Bipod  - Lever Mount With ARMS 17S Mount
3. BT10-NC - Atlas Bipod  - No Clamp, takes any 17S lever mount and mounts directly to our Accuracy International and Sako TRG Style Spigot mount to be released soon.