Skip to content
BT17 4" Picatinny Rail

BT17

BT17: 4″ Picatinny Rail

The BT17 is a 4 inch Picatinny rail section that adds a clean mounting point to your forend, so you can clamp an Atlas bipod to a rifle that did not come with a rail. The extra length gives you room to position the bipod for balance and loading. For shorter setups, the BT15 3.35 inch rail does the same job in a more compact length. Machined in the USA and backed by a lifetime warranty.

Condition

Price range: $29.71 through $34.95

In stock

The Details

Product Info

Fits hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).

A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks.

The BT17 can also be attached to a horizontal surface on the Butt section to attach our BT12, BT13 or BT31 Precision Rail Monopods.

Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. Weighs 1.20 ounces.

Recommend Torque Specifications for Installation:

  • For attaching accessories to metal hand guards: 35 in/lbs
  • For attaching accessories to polymer hand guards: 15 in/lbs
  • Installation torque values are not minimums, they are recommended limits

Built to a Standard

Key Features

It gives your forend a Picatinny rail. The BT17 bolts to a forend with mounting holes and provides 4 inches of Picatinny rail for an Atlas clamp.

Adds a 4 inch Picatinny rail to a forend

Room to position the bipod for balance and loading

Pairs with any clamp-equipped Atlas bipod

Knowledge Is Power

Frequently Asked Questions

Still weighing whether the BT17 4in Picatinny Rail is right for your rifle? These quick answers tackle what we get asked most: how the options compare, what fits your rifle, and where it is made.

What is the BT17 rail for?

The BT17 is a 4 inch Picatinny rail section that bolts to a forend with mounting holes, giving a rifle a Picatinny rail so an Atlas bipod can clamp on.

BT17 or BT15: which length do I need?

The BT17 is 4 inches with more room to position the bipod; the BT15 is 3.35 inches and more compact. Choose by your forend length and how much fore-aft adjustment you want.

Does the BT17 fit my rifle?

It mounts to forends with compatible mounting holes. Check your forend's hole pattern, or if your rifle only has a sling stud, use the BT81 adapter instead. Ask our team to confirm fit.

Do I need a gunsmith to install it?

No, if your forend already has the mounting holes; it is a hand-tool install. If your forend has no holes, the BT81 sling-stud adapter is a no-gunsmith path to a rail.

Is the BT17 made in the USA?

Yes. The BT17 is machined in the USA by B&T Industries and backed by a lifetime warranty.