Description

The BT12-QK is the only monopod that will work with the BT29 Sako TRG Rail Kit in order for it to lock in folded position.

NOTICE: B&T Industries L.L.C. strongly recommends a competent Gunsmith install the BT29 Sako TRG Rail Kit. We will not be responsible for any property damage resulting from the use or installation of their products.

INSTRUCTIONS:

1. Remove the Butt Plate Base and Butt Plate Fastening Rail exposing the lower .50 ID frame tube.
2. Remove any obstructions from this tube.
3. Insert the Bar Nut into the frame tube.
4. Using the long Guide Screw, locate the Bar Nut hole furthest away from the Guide Screw under the stock’s factory hole.
5. Insert 10-32×3/4 screw through the hole in the widest portion of the Rail threading into the Bar Nut.
6. Confirming the Rail is in-line with the stock, mark the location for the second hole.
7. Remove the Rail and Bar Nut.
8. Drill a 13/64 (.203) DIA. hole.
9. Re-install the Bar Nut, Rail, Cushion and fasteners.