Description

Process for anyone wanting to apply an aftermarket finish to a new, unassembled B&T product:

1. Appropriate parts ship unassembled direct to customer.
2. Customer confirms proper parts are received and initials Inventory Form.
3. Coating is completed to customers satisfaction.
4. Customer returns coated parts and Inventory Form to B&T.
5. B&T assembles them to specifications for quality assurance.
6. Completed unit is shipped back to customer.

PLEASE NOTE: It is the customer’s responsibility to notify us within two days of receipt of any missing parts. It is also the customers responsibility to verify coating is to their satisfaction and that ALL parts are returned to B&T for assembly. ALL masking materials/residue must be removed prior to parts being returned. In the event of excess coating on the parts requiring additional reaming, scraping, filing and/or sanding there will be a minimum of $30.00 fee per Bipod/Monopod for such services. B&T will not be held responsible for the appearance of such reamed, scraped, filed and/or sanded parts nor will B&T be responsible for the function of such parts in assembly. By coating our products the customer is assuming ALL risks.

Important Notes for Success of this Procedure:

1. Parts should be returned within 30 days to ensure compatibility with current production.
2. Ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.
3. We ship the parts with an Inventory Form that shows the appropriate parts and quantities of each. This form should be used by ALL parties to verify ALL parts remain together throughout the process and is returned to B&T with the coated parts.
4. The Atlas Bipod is manufactured with close tolerances. Any excess finish applied may negatively affect proper assembly and functionality. In this case, the excess finish will be removed to allow proper function. Pay particular attention to the “through holes” found on the Inner and Outer Legs.
5. We do not sell or ship replacement parts and we do not ship parts to anyone other than the customer that is buying the product(s). B&T will not be held responsible for the aftermarket finish.

Using the KMW “Pod-Loc®”

With the Super CAL bipod mounted to your rifle, you will be able to lock and un-lock the canting motion by rotating the Pod-Loc® lever. Turn clockwise to lock and counter clockwise to un-lock. The Pod-Loc® lever position can be adjusted for positioning by pulling the lever directly away from the body of the Super CAL and rotating to desired position. This positioning can be repeated until optimal position is achieved.

More Information & Accessories

• Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions
• Solid leg positions allows shooter to load the bipod at the 45 and 90 degree positions.
• Non-orientated leg length adjustment done by either hand: Outer leg slides on the Inner leg locating on any of the seven positions ¾” apart
• Standard soft, durable rubber feet that are suitable for many surfaces included
• Optional interchangeable Ski Feet and Raider Cleat easily swapped in the field with the press of a stainless steel plunger
• Optional mounting systems available for Accuracy International and Sako rifles