Description
The BT12-QK is the only monopod that will work with the BT29 Sako TRG Rail Kit.
NOTICE: B&T Industries L.L.C. strongly recommends a competent Gunsmith install the BT29 Sako TRG Rail Kit. We will not be responsible for any property damage resulting from the use or installation of their products.
INSTRUCTIONS:
- Remove the Butt Plate Base and Butt Plate Fastening Rail exposing the lower .50 ID frame tube.
- Remove any obstructions from this tube.
- Insert the Bar Nut into the frame tube.
- Using the long Guide Screw, locate the Bar Nut hole furthest away from the Guide Screw under the stock’s factory hole.
- Insert 10-32×3/4 screw through the hole in the widest portion of the Rail threading into the Bar Nut.
- Confirming the Rail is in-line with the stock, mark the location for the second hole.
- Remove the Rail and Bar Nut.
- Drill a 13/64 (.203) DIA. hole.
- Re-install the Bar Nut, Rail, Cushion and fasteners.
Reviews
There are no reviews yet.